Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2022-01-19 08:03
436
phlbcy(Mr.)
Zhejiang
398 Chuangye Road, Dushangang Town, Pinghu City, Jiaxing City, Zhejiang Province
DBAO VP1
Configuration:
Rated motor power |
72V/2000W Brushless Motor |
Battery |
72V20AH lithium battery |
Charger |
72V30E |
Controller |
72V40A |
Speed |
60km/h |
Range |
80km |
Brake(Front/Rear) |
Front disc brake, rear drum brake |
Light |
LED |
Display |
LED display |
Shock absorber |
Front and rear suspension |
Wheel size and type |
350-10 Tubeless tyre |
Anti theft system |
Remote control alarm |
Width of footboard |
250MM |
Length of footboard |
340MM |
Chassis clearance |
120MM |
Wheel base |
1025MM |
Width of side panel |
360MM |
Climbing ability |
16° |
Weight(include battery) |
65KGS |
Product dimension |
1360*720*1025 |
Container loading qty. |
42pcs/84pcs |
2000w electric motorcycle DBAO VP1
Details:
For more information about 2000w electric motorcycle, welcome information and customer service.
FAQ:
What are the faults of electric vehicles?
Regardless of the number of failures, they can be classified into two categories:
One type is flexible failure: the so-called flexible failure refers to sometimes it occurs, sometimes it does not occur, or that there is no obvious rule to follow when the failure occurs, such as the constantan wire in the controller is unsoldered, sometimes the contact is good, and the motor is normal Run; sometimes if the contact is not good, the motor will start weakly. Such failures must first analyze the relevant aspects and measure the relevant parameters. If there is no clue for a while, the simplest and most effective method is to replace the parts.
One type is rigid failure: the so-called rigid failure means that once this type of failure occurs, it will remain unchanged, the scope of the failure will not be expanded, will not be transferred, and the failure phenomenon will not change. If the brake lever is damaged due to the power failure, the motor cannot be cut off, just replace it with a new product. This type of failure is easier to repair. Generally, those with a little theoretical knowledge can first judge and then replace the parts to increase the rate of repair.
http://www.dbaoescooter.com/